1. Take off the protective foil from the tape.
2. Place the transfer motif on the required position of the cloth.

3. Lay an ironing fabric on the top of the motif and close the heat press.Required application time is completed, release the press.
4. Turn inside out then press once again.
5. Remove the sticker from the cloth after cooling.
6. Turn inside for wash and set dryer on low to dry.
1. Material Type : Cotton, Denim materials and etc.
FRONT SIDE
BACK SIDE
PRESSURE (kg)
2.8~3.2
2.8~3.2
TEMPERATURE (℃)
150~170
150~170
TIME (seconds)
10~20
7~12
2. Conditions of Pressing Mixed Type of Hot Fix Items
FRONT SIDE
BACK SIDE
PRESSURE (kg)
3.0~3.5
3.0~3.2
TEMPERATURE (℃)
150~180
150~180
TIME (seconds)
15~20
10~15
3. Conditions for Pressing Rhinestones
FRONT SIDE
BACK SIDE
PRESSURE (kg)
2.8~3.5
2.8~3.0
TEMPERATURE (℃)
150~180
150~170
TIME (seconds)
15~20
7~12
4. Conditions for Pressing Iron on Studs and Rhinestones
FRONT SIDE
BACK SIDE
PRESSURE (kg)
2.8~3.2
2.8~3.2
TEMPERATURE (℃)
150~180
150~170
TIME (seconds)
10~15
7~1210
5. Conditions for Pressing Pearls and Glitters
FRONT SIDE
BACK SIDE
PRESSURE (kg)
2.8~3.0
2.8~3.0
TEMPERATURE (℃)
150~180
150~180
TIME (seconds)
13~18
12~15
  1. Take projecting buttons, zippers and other thick sections into consideration!
  2. Thin fabrics(organza) do not absorb the adhesive well.
  3. Always allow the carrier foil to cool off completely before removing it!
  4. If impressions have already been caused by foil, brushing, steaming or applying the heat press once more, regenerates the fabric structure.
 
    Design NO.